从废水到新能源:光催化燃料电池的优化与应用

随着经济的飞速发展,社会对能源的需求日益扩大,对工业废水的无害化处理也提出了更高的要求。光催化燃料电池 (photocatalytic fuel cell, PFC) 在燃料电池中引入半导体光催化材料作为电极,实现了有机污染物高效降解和同步对外产电的双重功能,在废水无害化与资源化利用方面具有潜在的应用价值。半导体光催化电极是PFC系统高效运行的核心组件,增强其可见光响应和光生载流子分离是提高PFC性能的关键策略。反应器结构设计和运行参数优化也有利于改善PFC性能。本文从PFC基本原理和应用入手,综述了PFC在环境污染物资源化处理中的研究进展,并详细阐述了提高PFC的污染控制性能和产电效率的优化手段,为进一步设计高效稳定的PFC系统并实现其在水污染控制和清洁能源生产中的应用提供理论指导。     

Entropic effect implication for change in polymer coils swelling state in the demixing enthalpy recovery of aqueous poly(vinyl methyl ether) solutions

Time‐dependent demixing enthalpy recovery behavior of aqueous poly(vinyl methyl ether) (PVME) solutions exhibits distinct recovery characteristics in three concentration regions. The absence of recovery behavior below a water concentration of 38.3 wt % indicates that the PVME coil is in a globular state. The typically sigmoidal recovery behavior of demixing enthalpy above 38.3 wt % is ascribed to the reswelling of the collapsed polymer coils induced by the entropic effect. The increase in difference between the upper and lower limits indicates the continued swelling of the PVME coils. Above 65 wt %, a dominant diluting effect can be observed, and a much longer phase separation time is needed to reach the expected lower limit. In contrast, the recovery of demixing enthalpy in a wide range of water concentration (from 38.3 to 90 wt %) exhibits the same feature. The infrared spectroscopy results are in agreement with the above macroscopic differential scanning calorimetry results. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 142–151     

多层网络级联失效的预防和恢复策略概述

现实生活中,与国计民生密切相关的基础设施网络大多不是独立存在的,而是彼此之间相互联系或依赖的,于是用于研究这些系统的多层网络模型随之产生.多层网络中的节点在失效或者遭受攻击后会因"层内"和"层间"的相互作用而产生级联效应,从而使得失效能够在网络层内和层间反复传播并使得失效规模逐步放大.因此,多层网络比单个网络更加脆弱.多层网络级联失效产生的影响和损失往往是非常巨大的,所以对多层网络级联失效的预防和恢复的研究具有重大意义.就多层网络级联失效的预防而言,主要包含故障检测,保护重要节点,改变网络耦合机制和节点备份等策略.就多层网络发生级联失效后的恢复策略而言,主要包含共同边界节点恢复、空闲连边恢复、加边恢复、重要节点优先恢复、更改拓扑结构、局域攻击修复、自适应边修复等策略.     

Point‐to‐Plane Nonhomogeneous Electric‐Field‐Induced Simultaneous Formation of Giant Unilamellar Vesicles (GUVs) and Lipid Tubes

It is well‐known that homogeneous electric fields can be used to generate giant unilamellar vesicles (GUVs). Herein we report an interesting phenomenon of formation of GUVs and lipid tubes simultaneously using a nonhomogeneous electric field generated by point‐to‐plane electrodes. The underlying mechanism was analyzed using finite element analysis. The two forces play main roles, that is, the pulling force (F) to drag GUVs into lipid tubes induced by fluid flow, and the critical force (Fc) to prevent GUVs from deforming into lipid tubes induced by electric fields. In the center area underneath the needle electrode, the GUVs were found because F is less than Fc in that region, whereas in the edge area the lipid tubes were obtained because F is larger than Fc. The diffusion coefficient of lipid in the tubes was found to be 4.45 μm² s^?1 using a fluorescence recovery after photobleaching (FRAP) technique. The method demonstrated here is superior to conventional GUV or lipid tube fabrication methods, and has great potential in cell mimic or hollow material fabrication using GUVs and tubes as templates.     

Cold,warm, and hot programming of shape memory polymers

In this article, programming is classified as hot, warm, and cold, based on the temperature zone within which the programming is conducted. The strain and stress locking and releasing mechanisms are discussed within the thermodynamics framework. A new formula is developed for quantifying the strain recovery ratio of cold-programmed SMPs. Stress fixity ratio and stress recovery ratio are also defined based on the understanding of stress locking and recovery mechanisms. State-of-the-art literature on warm and cold programming is reviewed. Well-controlled programming as well as free strain recovery test and constrained stress recovery test are conducted, in order to validate the memory mechanisms discussed in this study. It is found that, while programming temperature has an insignificant effect on the final free shape recovery, it has a significant effect on the stress recovery. The recovery stress programmed by cold programming may be lower, equal to, or higher than that by hot programming, due to the different stress locking mechanisms and other factors such as damage during the thermomechanical cycle. Cold, Warm, and Hot Programming of Shape Memory Polymers © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1319–1339     

缝洞型碳酸盐岩油藏注水驱油提高采收率研究

Y油田为缝洞型碳酸盐岩油藏,油藏复杂的地质特征决定了其开发模式有别于常规砂岩油藏.为了有效提高Y油田采收率,利用Eclipse数值模拟软件建立了地质模型,对水平井长度、射孔间距及酸压缝长等油藏产能影响因素与转注时机、注采比以及关井时间等注采参数进行了优化.结果认为:对于Y缝洞型碳酸盐岩油藏,水平井水平段长度为500m、射孔间距为20m或酸压规模为100m时,累计产油量可达到最大值;压力降至废弃压力时进行转注,可获得最大采收率;周期注采比等于1时,周期时效与累计增油量达到最大值;关井时间为8天时,采收率提高幅度最大.     

超临界水驱超稠油提高采收率热物理特性研究

超稠油资源的高效开发对于提高石油供给和保障我国石油安全意义重大。针对深层超稠油资源由于原始地层压力高、原油黏度大导致常规蒸汽驱无法有效开发的问题,本文提出超临界水驱开发深层超稠油的新思路。本文首先研制了超临界水驱油提高采收率实验平台,研发的管式填砂岩心模型能够模拟岩心升温和驱替的同步过程,然后开展了超临界水驱、蒸汽驱和热水驱对比实验研究,实验结果表明,相对于蒸汽驱,超临界水驱能显著提高采收率并具有更高的热效率,25MPa、400℃超临界水驱鲁克沁超稠油的采收率达到97.07%;获得了超临界水驱过程的温度场和驱替压差变化规律,发现了超临界水超覆现象,与蒸汽超覆相比,超临界水超覆发生晚且持续短,可扩大波及范围,提高采收率。     

A sample preparation method for recovering suppressed analyte ions in MALDI TOF MS

In matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI TOF MS), analyte signals can be substantially suppressed by other compounds in the sample. In this technical note, we describe a modified thin‐layer sample preparation method that significantly reduces the analyte suppression effect (ASE). In our method, analytes are deposited on top of the surface of matrix preloaded on the MALDI plate. To prevent embedding of analyte into the matrix crystals, the sample solution were prepared without matrix and efforts were taken not to re‐dissolve the preloaded matrix. The results with model mixtures of peptides, synthetic polymers and lipids show that detection of analyte ions, which were completely suppressed using the conventional dried‐droplet method, could be effectively recovered by using our method. Our findings suggest that the incorporation of analytes in the matrix crystals has an important contributory effect on ASE. By reducing ASE, our method should be useful for the direct MALDI MS analysis of multicomponent mixtures. Copyright © 2015 John Wiley & Sons, Ltd.     

气基磁化焙烧回收包头稀土尾矿中铁的研究

试验采用磁化焙烧-磁选的方法来回收包头稀土尾矿中的Fe。考察了还原球团的粒径、焙烧温度、还原气体的成分、还原气气体流量、焙烧时间对于磁化焙烧回收Fe的影响。在焙烧温度为580℃,CO与CO2的浓度比为40∶60,还原气体气流量为1.2 L·min-1,焙烧时间为60 min的条件下对球团进行磁化焙烧,并将焙烧后的球团进行磨矿,使得-200目的物料占物料总重量的95%。将磨矿后的物料置于磁场强度为233 k A·m-1的磁选管中进行磁选,可以得到品位为60%左右的铁精矿,其铁回收率达到70%左右。